Structural Engineers for Solar Roof Calculations

We provide structural roof assessments and calculations for solar PV installations. We assess your existing roof, review the proposed system and explain whether strengthening or changes to the installation are needed.

Structural Calculations for Solar Installation

Before solar panels are installed, the existing roof’s ability to carry the additional load needs to be checked. Building Regulations normally apply to roof-mounted solar installations in England, and some properties may require strengthening work.

Our structural calculations assess your proposed installation against the roof supporting it. We explain whether the assessed structure is suitable, whether further investigation is needed and what structural changes may be required.

Whether you are planning an installation or your solar installer has requested a structural report, our team can review your project and provide a quotation for the work required.

Book A Solar Structural Assessment

Get expert structural calculations and clear guidance for a safe, compliant installation.

What Do Solar Panel Structural Calculations Check?

We tailor the assessment to your property and proposed installation. Depending on the roof construction and mounting method, our checks can include the following.

Panel Weight and Roof Capacity

We consider the weight of the panels and mounting equipment alongside the loads already carried by your roof. This includes assessing the relevant supporting members, such as rafters, purlins or trusses.

Mounting Systems and Fixing Points

The mounting system transfers loads into the roof through its connections. We assess how the proposed arrangement loads the supporting structure, including where forces are concentrated at individual fixing points. Information from your installer or mounting-system supplier helps establish the structural checks required.

Wind Loading and Uplift

Wind can pull panels upwards as well as push against them. Building height, roof shape, location and exposure influence these forces. Panel positions also matter, particularly near roof edges where greater uplift can occur.

Snow and Maintenance Loads

We consider relevant snow loads and allowances for maintenance access. The assessment checks the appropriate loading scenarios and combinations, taking account of the roof’s use and configuration.

Roof Construction and Condition

Our assessment needs to reflect the roof as it exists today. Previous alterations, removed or modified timbers, heavier replacement coverings and signs of structural distress can all affect its suitability for solar panels. We identify where further information or investigation is needed.

Our Testimonials

We have used the Home engineers several times and always recommend them. A very professional service at a reasonable price. Daniel was very responsive and responded within a day and was able to book us in within a reasonable timeframe.

Susan Pybus

I required a structural engineer's advice on some renovation works at my house. As an architect I work with engineers all the time and Daniel was incredibly helpful, knowledgeable, easy to deal with and quick. I definitely recommend them for any type of engineering work. Looking forward to more collaboration in the future.

Katia Hinic

We were recommended Home Engineers by friends and they have been fantastic. Dan took the lead on helping us understand what was needed to make our vision a reality. We are now in full flow and excited for the renovations to get going. Thanks Dan

Nick Dell'anno

How Our Solar Panel Assessment Service Works

1. Send Us Your Project Details

Start with your property address, proposed panel layout and any panel or mounting-system specifications you have. Existing roof drawings, previous structural calculations and photographs are also helpful.

Tell us about any previous roof alterations and your intended installation date. We will review the information and provide a quotation explaining the work included.

2. Establish the Roof Construction

We will confirm whether the available information is sufficient or whether an inspection is needed.

A site visit can help establish the roof’s construction, the sizes, spans and spacing of supporting members, their supports and visible condition. Where important details are concealed or uncertain, we will explain what further information is required.

3. Complete the Assessment and Explain the Findings

We carry out the agreed structural checks and provide the assessment documentation. We explain the findings and can discuss structural queries with you and your appointed installer or contractor, with additional design work agreed where necessary.

Structural Assessments for Solar Panels on Flat Roofs

Flat-roof solar installations may use mechanically fixed mounting systems or ballasted systems, which use additional weight to help hold the panels in position. The mounting method affects how loads reach the roof.

For ballasted systems, the roof must support both the solar equipment and the proposed ballast. Resistance to wind and sliding also needs checking. For installations covered by MCS requirements, a qualified structural engineer must be consulted about the roof’s capacity for these combined loads.

Planning solar panels for a flat roof? Send us your proposed layout and mounting details so we can confirm the assessment required.

Wider rooftop solar panel on a flat roof

What Will You Receive?

Your report will identify the roof structure and proposed solar installation assessed, alongside the relevant structural calculations, supporting information and assumptions.

We will explain whether the assessed structure is suitable for your proposal and highlight any conditions, limitations or further investigation needed. The report will also set out recommendations for strengthening, other necessary works or changes to the proposed installation.

Where a site inspection is included, our assessment will draw on the measurements and observations recorded during the visit. Any additional strengthening design or drawings required will be confirmed in your quotation.

What Happens if Your Roof Needs Strengthening?

If your roof cannot support the proposed solar installation in its current condition, we will explain the findings and discuss practical next steps with you and your installer.

Depending on the assessment, this could involve reinforcing roof timbers, adding supports or changing how loads are distributed. We may also explore a revised panel layout, a smaller installation or an alternative mounting system.

The solution will depend on your roof and the structural issue identified. Any revised proposal will need to be assessed against the supporting structure to establish its suitability. Where strengthening is required, we can provide the necessary structural calculations and drawings within an agreed scope, giving your contractor the information needed to plan the work.

Our Awards

astructural award
astructural award again
astructural awards
astructural award (2)
a structural award

Could Your Roof Be Unsuitable for Solar Panels?

Don’t risk costly installation problems. Our structural engineers assess your roof’s capacity, identify potential issues and provide the calculations you need to move forward with confidence.

Get in touch below for a free, no-obligation quote.

FAQs

Can existing structural calculations be used for my solar installation?

Send us any existing calculations for review. We will check whether they provide the information needed for the proposed installation or whether further assessment is required. Please also tell us about changes to the roof or solar proposal since those calculations were prepared.

How much do structural calculations for solar panels cost?

We provide a project-specific quotation rather than a fixed price for every property. Your quotation will reflect the assessment required, the information available and any inspection or additional design work included. Send us your proposal so we can confirm the scope and fee.

What information should I provide for a solar panel structural assessment?

Please send your property address, proposed panel layout, panel specifications and mounting-system details. Existing roof drawings, previous structural calculations and photographs are also helpful. Let us know about any previous roof alterations, and we will explain what additional information is needed.

Will a structural engineer need to visit my property?

A site visit may be needed where drawings and other information do not provide enough detail about the structure. Some projects can be assessed using suitable existing information, while others require an inspection. We will confirm the approach after reviewing your enquiry.

Can an older roof support solar panels?

An older roof is not automatically unsuitable. Its supporting timbers, fixings and condition need assessment. The roof covering’s remaining life also matters, because future roof repairs may require panels to be removed and reinstalled.

Do I need a structural engineer before installing solar panels?

Not every installation requires a separately commissioned engineer’s report. However, MCS requirements call for a qualified structural engineer where the roof is unusual or its adequacy is uncertain, and for roof-capacity checks on ballasted systems.